Maintenance points of eddy current sorting machine

Eddy current sorting is an effective non-ferrous metal recovery method. It has the advantages of excellent sorting effect, strong adaptability, reliable mechanical structure, light structure, strong repulsive force (adjustable), high sorting efficiency and large processing capacity. It can separate some non-ferrous metals from electronic waste.

1. The manufacturer of the eddy current sorting machine should check and sort out in time. After the daily operation, the machine should be cleaned in time to check whether the screws at various parts are loose and the wear conditions of vulnerable parts such as claws and sieves.

2. Filling with grease, commonly used is to install a cover type oil cup on the bearing. Under normal circumstances, as long as the oil cup cover is rotated 1/4 turn every 2 hours, the grease in the cup is pressed into the bearing. If it is a closed bearing, grease can be added once every 300 hours. After long-term use, if the grease changes, the bearings should be cleaned and replaced with new grease. During equipment operation, the bearing temperature should not exceed 40°C. If the bearing temperature continues to increase under normal operating conditions, the cause should be found and the fault should be eliminated.

3. Carefully clean the materials to be destroyed. It is strictly forbidden to mix copper, iron, lead and other metal parts and large stones into the destruction room.