New Textile and Garment Waste Recycling Machine for Waste Cotton Fiber Textile Cotton Fabric Waste Recycling Machine

We recognize that quality management techniques can be used successfully not only for Medium Copper Wire Recycling Machine, Double Shaft Cable Shredder, radiator recycling line management, but also to continuously improve the system management of an enterprise. We advocate the management concept of unity, cooperation and brainstorming, and promote harmony but not sameness. With advanced production equipment, a clean production environment, and strong manufacturing capabilities, we strive to do every detail for our customers.

The advantages of our QD-800S and QD-800SA copper wire recycling machines:

1) Still with excellent performance even after 6-year using;

2) Separation rate could reach up to 99% at least.;

3) No secondary pollution;

4) Low noise.

QD-800S copper wire recycling machine and QD-800SA cable recycling machine are our medium-capacity copper wire recycling machines.

In the early days, we developed the QD-800S copper wire recycling machine and improved based on the QD-600S copper wire granulator machines. This QD-800S cable recycling machine is about 700-1200 kgs per hour, which has occupied a large share of our oversea markets. And it has been the most popular model of our copper wire recycling machines home and abroad these years.

QD-800SA copper wire granulator machine is developed based on the QD-800S copper wire granulator. It meets the requirement of our clients for a bigger capacity copper recycling machine.

QD-800SA copper wire granulator has an extra more QD-600 cable shredder than QD-800S copper recycling machine, others are the same. The QD-600 shredder has one discharging conveyor with belt-magnet on it. The belt-magnet can remove the iron in the shredded wires and cables. You can also choose one drum-type magnet. The drum-type magnet is much stronger than the belt-type magnet.

If the iron is removed before it goes into the main crusher of the QD-800S copper cable granulator, the blades in the main crusher wouldn’t be hurt that much. The blades could extend its service life.

With the help of QD-600 cable shredder, the main crusher of the QD-600S copper wire recycling machine would be fed short waste wires and cables, which would increase its capacity.

Both QD-800S copper cable recycling machine and QD-800SA copper wire recycling machine can not only process various waste wires and cables, such as the car cables, Ethernet wires,etc. but also many other kinds of scrap wastes, like the small radiators, small transformers, the connectors, and hardware made of copper and plastics, etc.

If you get one set of our QD-800S or QD-800SA copper wire granulator, you could get a good profit from recycling waste cables and wires, you will have less problems with the maintenance,too.

Generally one set of QD-800S copper wire recycling machine contains one feeding conveyor, one main crusher, two air separators, four vibration tables.

One set of QD-800SA copper cable granulator contains one set of QD-800S copper wire recycling machine and one set of QD-600 wire shredder. That’s totally one feeding conveyor, one main crusher, two air separators, four vibration tables, and one set of QD-600 cable shredder, one discharging conveyor with belt-type magnet or drum-type magnet.

If the wires and cables have much iron mixed, we could provide u the double-layer magnets which are placed under the copper outlet of the air separator and above the copper vibration table. They could help get rid of the iron, and make the copper much purer.

Regarding the tinned copper and the copper mixture, all the copper wire recycling machines can’t separate them, cause the densities of the tinned copper and copper are almost the same. And it definitely can’t use the magnets to separate. But their colors are different, tinned copper is silver, copper is gold, color separator may be a good choice.

And all the copper wire recycling machines can’t separate the copper from oil-filled wires and cables, either.

About the separation rate, it could be up to 99% at least, if the single copper conductor is bigger than 0.2mm; It could reach up to 98%, if the single copper conductor is smaller than 0.2mm, but up to 99% at least if with an electrostatic separator.

In the face of the new globalized fierce competition environment, we will use our strength to achieve great success, rely on innovation to promote development, and use quality to forge the future, and strive to become a New Textile and Garment Waste Recycling Machine for Waste Cotton Fiber Textile Cotton Fabric Waste Recycling Machine manufacturing enterprise with global influence. We always put the interests of customers in the first place and put this concept throughout every link from production to after-sales service to help customers reduce costs and enhance competitiveness. The improvement of employees fully reflects the people-oriented management philosophy, which is to train people with contribution and potential, so that the rapidly growing employees have more room for development. As far as employees are concerned, the company provides such a good development space for everyone, and everyone must contribute to the development of the company.

Hot Tags: large copper wire recycling machine, China, suppliers, manufacturers, factory, wholesale, buy, discount, for sale, in stock, made in China, plastics and metal separating machine, wire granulator, wire grinder, Vibration Table for Copper Granulator, motor recycling machine, automatic