Electrical Copper Cable Wire Making Winding Extrusion Twisting Drawing Coiling Extruder Bunching Buncher Recycling Cutting Double Twist Machine

Under the premise of scientific management system, we implement the unlimited pursuit of technological innovation and promote the renewal of automatic, Wet Plastic Gravity Sorting and Cleaning Equipment, Motor Rotor Recycling Machine. With the company's continuous innovation and research and development efforts, our company's business scope continues to expand. In order to adapt to the era of rapid change, we continuously improve and change innovation around customer demand and technology leadership. The company adheres to the business philosophy of 'no quality, no tomorrow'. Strict quality management and quality inspection ensure low defective rate.

The advantages of our QD-800S and QD-800SA copper wire recycling machines:

1) Still with excellent performance even after 6-year using;

2) Separation rate could reach up to 99% at least.;

3) No secondary pollution;

4) Low noise.

QD-800S copper wire recycling machine and QD-800SA cable recycling machine are our medium-capacity copper wire recycling machines.

In the early days, we developed the QD-800S copper wire recycling machine and improved based on the QD-600S copper wire granulator machines. This QD-800S cable recycling machine is about 700-1200 kgs per hour, which has occupied a large share of our oversea markets. And it has been the most popular model of our copper wire recycling machines home and abroad these years.

QD-800SA copper wire granulator machine is developed based on the QD-800S copper wire granulator. It meets the requirement of our clients for a bigger capacity copper recycling machine.

QD-800SA copper wire granulator has an extra more QD-600 cable shredder than QD-800S copper recycling machine, others are the same. The QD-600 shredder has one discharging conveyor with belt-magnet on it. The belt-magnet can remove the iron in the shredded wires and cables. You can also choose one drum-type magnet. The drum-type magnet is much stronger than the belt-type magnet.

If the iron is removed before it goes into the main crusher of the QD-800S copper cable granulator, the blades in the main crusher wouldn’t be hurt that much. The blades could extend its service life.

With the help of QD-600 cable shredder, the main crusher of the QD-600S copper wire recycling machine would be fed short waste wires and cables, which would increase its capacity.

Both QD-800S copper cable recycling machine and QD-800SA copper wire recycling machine can not only process various waste wires and cables, such as the car cables, Ethernet wires,etc. but also many other kinds of scrap wastes, like the small radiators, small transformers, the connectors, and hardware made of copper and plastics, etc.

If you get one set of our QD-800S or QD-800SA copper wire granulator, you could get a good profit from recycling waste cables and wires, you will have less problems with the maintenance,too.

Generally one set of QD-800S copper wire recycling machine contains one feeding conveyor, one main crusher, two air separators, four vibration tables.

One set of QD-800SA copper cable granulator contains one set of QD-800S copper wire recycling machine and one set of QD-600 wire shredder. That’s totally one feeding conveyor, one main crusher, two air separators, four vibration tables, and one set of QD-600 cable shredder, one discharging conveyor with belt-type magnet or drum-type magnet.

If the wires and cables have much iron mixed, we could provide u the double-layer magnets which are placed under the copper outlet of the air separator and above the copper vibration table. They could help get rid of the iron, and make the copper much purer.

Regarding the tinned copper and the copper mixture, all the copper wire recycling machines can’t separate them, cause the densities of the tinned copper and copper are almost the same. And it definitely can’t use the magnets to separate. But their colors are different, tinned copper is silver, copper is gold, color separator may be a good choice.

And all the copper wire recycling machines can’t separate the copper from oil-filled wires and cables, either.

About the separation rate, it could be up to 99% at least, if the single copper conductor is bigger than 0.2mm; It could reach up to 98%, if the single copper conductor is smaller than 0.2mm, but up to 99% at least if with an electrostatic separator.

Our company pays attention to quality control, and constantly strive to provide customers with first-class quality Electrical Copper Cable Wire Making Winding Extrusion Twisting Drawing Coiling Extruder Bunching Buncher Recycling Cutting Double Twist Machine. The company always insists on the business philosophy of quality for survival, management for benefit and integrity for development, takes customer satisfaction as the goal, puts product quality in the first place of work to grasp, and regards product quality as the life of the enterprise. Over the years, our company adheres to the tenet of 'employing talents, serving customers and achieving enterprises', and adheres to the business policy of 'market-oriented, innovation driven, quality based, service supported, integrity based and market-oriented'.

Hot Tags: large copper wire recycling machine, China, suppliers, manufacturers, factory, wholesale, buy, discount, for sale, in stock, made in China, wire crusher, cable granulator machine, wire cable stripping machine, Other Accessories, Large Cable Shredder, plastic and copper separator