Electrostatic Sorting Machine Usage Scenarios And Usage Requirements

1. The single sorting accuracy (purity) of broken particles is higher.

2. The complete set of equipment is a combined structure, covering an area of about 50 square meters.

3. Used in all kinds of mixed plastics that are difficult to sort by density flotation.

4. The sorting speed is fast (note: there should not be too much powder in the crushed material).

5. The size of the crushed material is loose, and the crushed pieces below 20mm can easily pass through the machine.

6. If there are too many powders and films in the crushed material, it is enough to add a screening and film removal device.

7. Sorting ABS/PS/submerged PP, ABS/ABS alloy/PC, PS/PET/PVC, PA/PE/PO, etc.

8. Dry separation mode, no three wastes, no environmental pressure, and fully meet the requirements of the new environmental protection law.

9. The particle size of the material has a strong selectivity to the voltage, and the number of voltages is different for different particle sizes of the material. Therefore, it is necessary to crush the material before it enters the main engine for separation, so that the separation effect can reach the ideal state.