What should I do after the blade of the shredder is worn?

The grinding method of the cutter of the shredder is fundamentally different from that of other equipment. The multi claw blade design of the cutter of the shredder makes it impossible for the grinder to grind it, and the single plane grinding of the blade will cause too large clearance between the blades and seriously affect the use. Other types of mechanical blades basically use a grinder to grind the plane or the edge part.

So how should the cutter of the shredder be polished? As the main part of the shredder, considering that the blade of the shredder often tears up dozens of waste products when used, the shredding complexity is high, which simply forms the wear of the blade edge of the shredder. Once the tool of the double axis shredder is blunt, the shredding effect will become very poor. At this time, it is necessary to replace the spare tool and disassemble the blunt tool for grinding. The grinding of the blade of the shredder is different from that of other cutting tools. Other types of mechanical blades are basically grinded on the plane or edge with a grinder. Due to the particularity of the structure of the cutter of the shredder and the planning of multi claw blades, the grinder cannot grind them, and a single plane grinding of the blade will form too large gap between the blades, which will seriously affect the application.